Using The Vacuum Cleaner - ECG VM 2120 HOBBY Mode D'emploi

5. Plug the electric cable in the electric outlet (
switch 7.
1

USING THE VACUUM CLEANER

Selection of suitable accessories according to the type of the vacuumed surface
Vacuum cleaner is supplied with accessories suitable for different types of floors and surfaces:
GB
• Combined floor nozzle with a switch between hard floors and carpets, articulated mechanism makes
A
cleaning corners and difficult to reach places easy to reach.
• Combined nozzle and dust brush for sofas, drapes and difficult to reach places in corners or between
B
the furniture.
• The upholstery nozzle is suitable for vacuuming furniture and other delicate surfaces.
C
A
Vacuuming
• Make sure that the vacuum cleaner is assembled according to the instructions.
• Connect the hose to the vacuum cleaner and attach the required accessories to the telescopic tube.
• Plug the power plug into an electric outlet, turn the vacuum cleaner on and vacuum as needed. After using
the vacuum cleaner, turn off the power switch and pull the power cord out of the outlet.
• You can regulate the air flow using the sliding valve 4.
Wet vacuuming
• Insert the plastic sealing ring to seal the vacuum cleaner before starting vacuuming. Then insert the motor
and lock it.
• When the liquid in the vacuum cleaner container reaches the maximum allowable level, the float of the
locking mechanism rises and automatically interrupts the air flow through the motor. In this case, switch
off the vacuum cleaner, disconnect the power supply and empty the vacuum cleaner container.
• After wet vacuuming, the filter should be dried to reduce the risk of mold formation and destruction of
the filter.
Dry vacuuming
• Make sure that the fabric filter is properly installed. Never vacuum without installed filter.
36
). The vacuum cleaner is now ready to turn on using the
4
2
B
C
3 4