Description Of The Vacuum Cleaner - ECG VM 2120 HOBBY Mode D'emploi

unless they are older than 8 years and under supervision. Children
under 8 years old must keep away from the appliance and its power
supply.

DESCRIPTION OF THE VACUUM CLEANER

E
D
C
B
A
K
List of parts
1. Hose connection connector
2. Combined floor nozzle
3. Extension tube
4. Valve for air flow adjustment
5. Hose handle
6. Hose
7. On/Off switch
8. Handle
VACUUM CLEANER ASSEMBLY
If any part of the vacuum cleaner is missing or damaged, do not assemble the vacuum cleaner and contact
your vendor. The vacuum cleaner must be switched off and disconnected from power before you start to
assemble it!
1. Release the lock of the motor unit and pull it out of the dust container. Remove the wheels and the nozzles
from the container (
2. Turn upside down the vacuum cleaner dust container and attach four wheels into the slots in the base.
Make sure that the wheels can turn freely (
3. Insert the motor unit with the installed fabric filter on the vacuum cleaner container. Snap the motor unit
lock on the to the locks on the body of the vacuum cleaner.
4. Insert the end of the hose into the opening in the body of the vacuum cleaner and lock it by turning
clockwise ( ).
3
).
1
2
F
G
H
I
J
L
9. Motor unit lock
10. Power cord
11. Dust container
12. Wheels
13. Combined floor nozzle
14. Combination tapered nozzle and dust brush
15. Sealing ring
16. Fabric filter
).
M
N
GB
O
P
35