Maintenance And Cleaning - ECG VP 2122 S Mode D'emploi

MAINTENANCE AND CLEANING

Attention:
Always unplug the power cord from the outlet before any maintenance and cleaning.
1. Changing the dust bag: When the colour of the dust bag indicator changes to red, it is time to change the
dust bag.
• Press the lock in front to open the front cover (Fig. 1).
• Remove the holder with the bag and remove the full bag from the holder (Fig. 2).
• Installation of a new bag: Insert the bag in the holder and then insert the holder with the bag in the
grooves under the front cover (Fig. 3).
2. Clean the motor fi lter once a year: Open the front cover, remove the fi lter, wash it with warm water and dry
thoroughly before using it again. If the fi lter is damaged, replace it (Fig. 4).
3. Cleaning of the exhaust fi lter: Open and remove the exhaust fi lter cover. Wash the fi lter with warm water
and dry thoroughly before using it again. If the fi lter is damaged, replace it (Fig. 5, 6).
4. Cleaning of the appliance surface: Use soft and slightly moistened cloth with a few drops of the cleaning
solution to clean. Never use solvents or other abrasive cleaners. Never immerse the vacuum cleaner into
water or any other liquid and do not leave it under running water.
1
4
Attention:
You can fi nd the replacement bags for the VP 2122 S vacuum cleaner under the name KOMA ECG VP 2141 or
SWIRL® Y 98® MicroPor® Plus or BASE BA-1750.
® SWIRL, MicroPor and Y 98 are registered trademarks of Melitta Group.
2
5
3
6
GB
31