Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cutout Height Is Between 26
(68.4 cm and 70.3 cm)
1. Using two or more people, place the oven on its back
on a covered surface.
2. Remove the foot from the right front spacer by removing
the #8-18 x 3/8" (9.5 mm) screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. In the same manner, remove the feet on the right rear,
left front, and left rear of the oven.
4. Using two or more people, place the oven in its upright
position.
5. Go to the "Make Electrical Connection" section.
/
" and 27
/
"
15
11
16
16
A
B
C
Cutout Height Is Between 28
(72.8 cm and 74.8 cm)
1. Using two or more people, place the oven on its back
on a covered surface.
2. Remove the foot from the right front spacer by removing
the #8-18 x 3/8" (9.5 mm) screw.
NOTE: Do not remove the spacer.
A. Spacer
B. Foot
C. #8-18 x 3/8" (9.5 mm) screw
3. Rotate the foot 90°, so the short side of the foot
is positioned toward the top of the oven.
/
" and 29
/
"
11
7
16
16
A
B
C
9
Publicité
Table des Matières
