Accessories - Monogram ZDP486NDPSS Instructions D'installation

Masquer les pouces Voir aussi pour ZDP486NDPSS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ACCESSORIES—TOEKICK
•Install the toekick after the range has been leveled.
•Measure the distance between the floor
and the bottom of range.
•Loosen the two screws on each end. Adjust
the toekick height by sliding the upper and lower
pieces apart to 1/8" less than the measured height.
Installation
(provided)
Push
•Secure the top and bottom sections by tightening
the 2 screws on each end.
•Push toekick against range leg until clip snaps
to legs.
NOTE: Be sure the toekick snaps securely to the leg.
Top of
Toekick
Bottom
Screw
of Toekick
Push
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zdp486ldpss

Table des Matières