Turning The Power On And Off; Restarting The Machine - Sharp MX-C301 Mode D'emploi

TURNING THE POWER ON AND OFF

This machine has two power switches. The main power switch is on the
left side of the machine. The other power switch is the [POWER] key ( )
on the operation panel.
Turning on the power
1 Switch the main power switch to the "
2 Press the [POWER] key (
Turning off the power
1 Press the [POWER] key (
2 Switch the main power switch to the "
• If the main power indicator is blinking, press the
[POWER] key (
• When turning off the power, make sure that the
indicator lights on the operation panel turn off as well.
• In the event of a power failure or other reason that
causes the machine to suddenly turn off, turn back on
the power of the machine and then proceed to turn off
the machine following the correct procedures.
Switching off the main power switch or removing the
power cord from the outlet while any of the indicators
are lit or blinking may damage the hard drive and
cause data to be lost.
• Switch off both the [POWER] key (
power switch and unplug the power cord if you suspect
a machine failure, if there is a bad thunderstorm
nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the
main power switch in the "on" position.

Restarting the machine

In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine,
press the [POWER] key ( ) to turn off the power and then press the key
again to turn the power back on.
In some states of the machine, pressing the [POWER] key
( ) to restart will not make the settings take effect. In this
case, use the main power switch to switch the power off
and then on.
" position.
) to turn on the power.
) to turn off the power.
" position.
) after it becomes steadily lit.
) and the main
Main power
switch
When the main power
switch is switched on, the
main power indicator on the
operation panel lights up.
8
[POWER] Main power
key indicator