Part Names; Turning The Power On And Off; Restarting The Machine - Sharp MX-M654N Manuel Utilisateur

Interface 10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (when an external memory device is used)
Compatible TCP/IP (IPv4)
protocols
Compatible OS * Pull scan (TWAIN) Windows Server 2003, Windows Vista,
2
Output format (B/W)
TIFF, PDF, PDF/A, encrypted PDF, XPS
Compression method: decompression, G3 (MH), G4 (MMR)
(Grey scale/colour)
TIFF, JPEG, PDF, PDF/A, encrypted PDF, high compression
PDF, XPS*
3
Compression method: JPEG (high, mid, and low
compression)
Driver Driver
*1: You must decrease the scan size when increasing the resolution.
*2: There are cases when a connection cannot be established. Please contact
your local dealer for more information.
*3: XPS stands for XML Paper Specification.
Wireless LAN Specifications
Type Built-in type
Compliance IEEE802.11n/g/b
standards
Transmission OFDM (IEEE 802.11n/g), DS-SS (IEEE 802.11b)
method
Frequency band IEEE802.11n/g/b: 2.4 GHz (ch 1 - ch 13)
/ channels
Transmission IEEE802.11n max. 150 Mbps
speed IEEE802.11g max. 54 Mbps
(value of IEEE802.11b max. 11 Mbps
standard) *
1
Compatible TCP/IP (IPv4)
protocols
Security WEP, WPA Personal, WPA Enterprise*
WPA2 Enterprise*
*1: The indicated values are maximum theoretical values for the Wireless LAN
Standard. The values do not indicate actual data transmission speeds.
*2: Cannot be used in Access Point mode.

PART NAMES

(1) Automatic document feeder
(2) Operation panel
(3) Keyboard
(4) Front cover
(5) Tray 5*
(6) Tray 2
(7) Tray 3
* Optional
Windows Server 2008, Windows 7,
Windows 8, Windows Server 2012
, WPA2 Personal,
2
2
(8) Tray 4
(9) Tray 1
(10) Curl Correction Unit*
(11) Inserter*
(12) Folding Unit*
(13) Saddle stitch finisher*
TURNING THE POWER
ON AND OFF
This machine has a main power switch, found at the bottom left after
the front cover is opened, and a power button ( ), located on the
operation panel.
Main power
switch
Turning on the power
• Switch the main power switch to the " " position.
• After the main power indicator lights in green, press the power
button ( ).
Turning off the power
(1) Press the power button ( ) to turn off the power.
(2) Switch the main power switch to the "

Restarting the machine

In order for some settings to take effect, the machine must be
restarted. If a message in the touch panel prompts you to restart the
(1)
machine, press the power button ( ) to turn off the power and then
press the key again to turn the power back on.
(2)
CAUTION
(3)
• When turning off the power, make sure that the indicators on
(4)
the operation panel turn off as well.
• If the machine suddenly turns off, such as in the event of a
(5)
power failure, turn the machine on again, and then turn off
(6)
the machine following the correct procedure for turning off
the machine. Switching off the main power switch or
(7)
removing the power cord from the outlet while any of the
(8)
indicators are lit or blinking may damage the hard drive and
cause data to be lost.
(9)
• Switch off both the power button ( ) and the main power
switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are
moving the machine.
(10)
• When using the fax or Internet fax function, always keep
the main power switch in the " " position.
(11)
• In some states of the machine, pressing the power button ( )
to restart will not make the settings take effect. In this case, use
(12)
the main power switch to switch the power off and then on.
(13)
11
Main power
indicator
[Power] button
[Power Save]
button/indicator
" position.