R82 Quokka Guide D'utilisation page 22

FORWARD FACING
INSTALLATION FOR CHILDREN 10.1-18 kg (22.2-39.6 lbs.)
4. Verify that the vehicle belt is not
twisted and is routed above the
support bars, then buckle (Fig. D).
5. Push the child restraint firmly into the
vehicle seat while removing slack
first from the lap portion of the
vehicle belt. Adjust the shoulder
portion until the belt sits firmly inside
the shoulder belt guide (Fig. E).
• Pre-crash locking vehicle seat belts
will lock in one of two places: the
latch plate or the retractor. Check
your vehicle owner's manual to
determine how to lock your vehicle
seat belt system when installing a
child restraint.
6. Attach the top anchorage connector
to the designated tether anchor.
Remove all slack from the top
anchorage strap to secure. Store
excess webbing by rolling it up and
use the Velcro strap to secure the roll.
7. Verify that the vehicle belt is tight and
the child restraint is secure.
• The child restraint is secure when it
cannot be moved front-to-back or
side-to-side more than 1 in. (2.5 cm)
at the belt path. If the child restraint
is not secure, repeat this process or
use an alternate seating location.
20