MartinLogan ElectroMotion IC Mode D'emploi page 11

MARTINLOGAN ElectroMotion IW
47–25,000 Hz ± 3 dB
80° x 80°
90 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6, or 8 Ohm rated
amplifiers.
2,500 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
6.5" (16.5cm) aluminum cone with cast aluminum
basket. Concave dust cap.
Push style with banana jack.
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–200 watts
100 watts
5.5 lbs. (2.5 kg)
11" x 8.5" x 3.925" (27.9cm x 21.6cm x 10cm)
10.25" x 7.875" (26cm x 20cm)
0.125" (0.3cm)
3.8" (9.7cm)
MARTINLOGAN ElectroMotion R
37–25,000 Hz ± 3 dB
80° x 80°
92 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6, or 8 Ohm rated
amplifiers.
2,600 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
8" (20.3cm) aluminum cone with cast aluminum
basket. Concave dust cap.
Push style with banana jack.
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–300 watts
150 watts
8 lbs. (3.63 kg)
11.5" x 6" (29.3cm x 15.2cm)
10.5" (26.7cm)
0.125" (0.3cm)
5.9" (15cm)
11