Specifications - MartinLogan ElectroMotion IC Mode D'emploi

s
PeCiFiCations
Speaker Model . . . . . . . . . . . . . . . . . . . . . . . . . .
System Frequency Response . . . . . . . . . . . . . . .
Aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover Frequency . . . . . . . . . . . . . . . . . . . . .
High-Frequency Driver . . . . . . . . . . . . . . . . . . . .
Low-Frequency Driver . . . . . . . . . . . . . . . . . . . . .
Binding Post Inputs . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suitable Amplifier Range . . . . . . . . . . . . . . . . . .
Maximum Power Handling . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Size (diameter x depth | height x width x depth)
Required opening (including tolerance) . . . . . . . .
Projection from wall surface . . . . . . . . . . . . . . . .
Depth required behind wall surface . . . . . . . . . .
10
*
*Specifications are subject to change without notice.
MARTINLOGAN ElectroMotion IC
47–25,000 Hz ± 3 dB
80° x 80°
90 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6, or 8 Ohm rated
amplifiers.
2,600 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
6.5" (16.5cm) aluminum cone with cast aluminum
basket. Concave dust cap.
Push style with banana jack.
Custom air core coil inductors. Polyester film
capacitors in series and low DF electrolytic
capacitors in parallel. Overall system thermal/cur-
rent protection.
20–200 watts
100 watts
5 lbs. (2.3 kg)
9.1" x 5.325" (23.1cm x 13.5cm)
8.2" (20.8cm)
0.125" (0.3cm)
5.2" (13.2cm)