Introduction; Before You Begin; Receiving Inspection; To Return Pumps To Factory For Repair Or Exchange - Stryker TP600 Manuel D'utilisation

BEFORE YOU BEGIN

Read and understand this T/PUMP OPERATOR'S MANUAL and all SAFETY PRECAUTIONS
(see page 1-3) prior to using the T/Pump.
Only qualified medical service personnel should repair or perform function tests on the T/Pump. Contact your dealer
or Stryker's Technical Service Department for assistance:
Telephone: (800) 327-0770

RECEIVING INSPECTION

Check the shipping carton for damage immediately upon receipt. If package damage is discovered, the device should
be unpacked with the carrier's agent present. Any claims for shortage or damage must be filed with the delivering
carrier by the purchaser. Do not return pumps that were damaged in shipment to Stryker without contacting our
Technical Service Department for advice (see phone numbers below). If damaged goods are returned to Stryker
without notifying the carrier, Stryker will assume the repairs will be made at the customer's expense.

To Return Pumps To Factory For Repair Or Exchange

Merchandise returned to Stryker must be accompanied by a Return Goods Number (RG#), issued by Stryker,
authorizing goods to be returned. Contact Customer Service at:
Customer Service:
1-4

Introduction

(800) 327-0770
101515 REV C