Keypad Features Tp700 Series - Stryker TP600 Manuel D'utilisation

KEYPAD FEATURES TP700 SERIES

Indicator/
Warning Light
Setpoints
Setpoint Lock
Therapy
Cycles
On/Standby
Button
1-10
Features
Figure 4: TP700 Series Keypad
See the Troubleshooting section on
Water Flow
Check hoses or clamps for kinks or occlusions.
Water Level
Check water level.
Press the button at the bottom of the setpoint indicator
to toggle through the four setpoints. Temperatures are
identified in °C and °F.
Prevents tampering.
Press and hold for 2 seconds to lock or unlock the
setpoint.
Continuous cycle, 30-minute cycle or 20-minute cycle.
Green indicates the unit is on.
Yellow indicates power is supplied to the unit but the unit
is not on.
101515 REV C
page 1-15.