Colder - Stryker TP600 Manuel D'utilisation

COLDER

To connect and disconnect Colder
1. Push the male coupling onto the female coupling. When you hear an audible click, the connectors are joined
(Figure 6A).
2. To open or close the hose pinch clamps:
• Open the clamp by pushing the serrated end (Figure 6B).
• Close the clamp by pressing the clamp together (Figure 6C).
3. To disconnect, press down on the thumb tab of the female coupling. The couplings will partially disconnect.
4. Pull the male coupling out fully to disconnect (Figure 6D).
1-12
Operating Instructions
® to a pad:
Figure 6: Colder
101515 REV C