Power Supply Cord; Features - Danby DAC150EB1GDB Guide D'utilisation Et Soins De Propriètaire

POWER SUPPLY CORD

The power cord supplied with this air conditioner contains a
device that senses damage to the power cord. To test if your
power cord is working properly, you must do the following:
1) Connect the power supply cord to an electrical outlet.
2) The power supply cord has two buttons located on the
head of the plug. One button is marked "TEST", and the
other is marked "RESET". Press the "TEST" button; you
will hear a click as the "RESET" button pops out.
3) Press the "RESET" button; you will hear a click as the
button engages.
4) The power supply cord is now energized and
supplying electricity to the air conditioner (on some
products this is also indicated by a light on the plug
head).
NOTE: The power cord supplied with this air conditioner
contains a current leakage detection device designed to
reduce the risk of fire. In the event the power supply cord
is damaged, it cannot be repaired and must be replaced
with a new cord from the product manufacturer.
Control Panel
Interior Air
Inlet
IMPORTANT SAFETY INFORMATION

FEATURES

• Under no circumstances should this device be used to
turn the unit on or off.
• The "RESET" button must always be pushed in
(engaged) for correct operation.
• The power supply cord must be replaced if it fails to reset
when the "TEST" button is pushed in.
Plug in and press
RESET
NOTE: Some plugs have buttons on the top.
3
TEST
RESET
Cabinet