Power Outage; Air Flow Direction Adjustment - Danby DPA085B1 Guide D'utilisation Et D'entretien

Operating Instructions
OPERATING MODES

POWER OUTAGE

AIR FLOW DIRECTION
ADJUSTMENT
SLEEP cycle
This unit features an operation mode that is designed to keep you
comfortable while sleeping, and save you money on your energy bill.
Simply press the sleep button. Depending on whether the unit is in heat-
ing or cooling mode, the temperature will either increase (cooling mode)
or decrease (heating mode) by 1°C / 2°F every half hour for 1 hour. It will
then hold this new temperature for 7 hours before returning to the original
temperature setting and resuming normal operation.
NOTE: This feature is unavailable in FAN and DRY mode.
In the case of a power outage or interruption, the unit will automatically
re-start with the default settings after the power is restored.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not operate for the first 3 minutes. This
is to protect the unit. Operation will automatically start after 3 minutes.
Adjust the air flow direction manually (Fig. 4):
-
The louver can be set to the desired position manually.
- Do not place any heavy objects or other loads on the louver, doing so
will cause damage to the unit.
- Ensure the louver is fully opened under heating operation.
9
Adjust
manually
Fig.4