Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
CONTROL PANEL
1. Temperature indicator
2. Super Freeze indicator
SWITCHING ON
Insert the plug into the wall socket.
SWITCHING OFF
To turn off the appliance, remove the plug from the
power socket.
TEMPERATURE REGULATION
To set the temperature, press the control button
repeatedly until you reach the desired temperature.
Recommended set temperature is:
•
+4°C for the fridge,
The temperature range may vary between 2°C and
8°C for fridge.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
•
room temperature,
•
frequency of opening the door,
•
quantity of food stored,
•
appliance location.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours. After a power failure it
remains stored.
1
1
8
6
4
2
°C
3sec
3
3
3. Control button
SUPER FREEZE FUNCTION
The Super Freeze is used to perform pre-freezing
and fast freezing in sequence of Freezer
compartment. This function accelerates the freezing
of fresh food and, at the same time, protects
foodstuffs already stored from undesirable
warming.
To activate the Super Freeze function, press and
hold the Control button for 3 seconds. The Super
Freeze indicator flashes.
This function stops automatically after 52 hours.
You can deactivate the Super Freeze function
before its automatic end by pressing and holding
the Control button for 3 seconds. The Super Freeze
indicator turns off.
2
2
To freeze fresh food activate the Super
Freeze function at least 24 hours
before placing the food to complete
pre-freezing.
67
Publicité
Table des Matières
