Marmitek CONNECT 236 Guide Utilisateur page 4

Front View and Back View
The Connect 236 has a total of six Input Channels. Input 6 is located on the front panel and
input 1 to 5 are located on the back panel.
1. Power switch button
To turn the Scart switcher on and off;
2. Remote Control Sensor
To receive the wireless remote control signals;
3. REC button
To change the RECORD function;
4. SET button
To confirm when changing your settings;
5. LCD Display
To display the Scart switcher status;
6. </> button
To change the input 1-6 (or program your settings)
7. Input 6 (External video input jacks)
To connect the device's Video and Audio jack to the Scart switcher;
8. Scart Input 1
To connect the device's Scart jack to the Scart switcher;
9. Scart Input/Output 2
To connect the device's Scart jack to the Scart switcher;
10. Scart Input/Output 3
To connect the device's Scart jack to the Scart switcher;
11. Scart Input 4
To connect the device's Scart jack to the Scart switcher;
12. Scart Input 5
To connect the device's Scart jack to the Scart switcher;
13. Scart Output
To connect the device's Scart jack to the Scart switcher;
4 © MARMITEK