Marmitek CONNECT 236 Guide Utilisateur page 11

Setting the record function
Set the REC function as below:
Press and hold the "REC" button 2 sec, and the "REC 1" symbol will flash, the record device
name is shown in the LCD if you have assigned one: example: CH2=VCR_1
Press the "<" or ">" button to select the channel for the input source signal, the device name
is shown in the LCD if you have assigned one; example: CH1= DVD_1
Press the "REC" button to confirm the source channel and finish the setting for "REC1".
The "REC 2" symbol will flash, the record device name is shown in the LCD if you assigned
one; example: CH3 = DVD_R
Press the "<" or ">" button to select the channel for the input source signal, the device name
is shown in the LCD if you assigned one; example: CH4=SAT_1
Pressing the "REC" button will confirm the source channel and finish setting up for "REC 2"
CONNECT 236™ 11