SEFRAM 7334 Manuel D'utilisation page 23

CAUTION
˙ Disconnect the test leads from the test points before chang-
ing the position of the function rotary switch.
˙ Do not expose Meter to extremes in temperature or high
humidity.
˙ Never set the meter in Ω, ,°C ,mA, A function to measure
the voltage of a power supply circuit in equipment that could
result in damage the meter and the equipment under test.
Symbols as marked on the Meter and Instruction
manual
Risk of electric shock
See instruction manual
DC measurement
Equipment protected by double or reinforced insulation
<
Battery
Fuse
Earth
AC measurement
Conforms to EU directives
Do not discard this product or throw away.
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage,
when the Tester detects a voltage ≧30 V or a voltage
overload (OL) in V, mV . The " " symbol is displayed.
Maintenance
Do not attempt to repair this Meter. It contains no userservice-
able parts. Repair or servicing should only be performed by
qualified personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents.
2