Sharp PN-655U Mode D'emploi page 46

PC Operation
<Response format in Advanced operation >
■ When a command has been executed correctly
• Response when no ID number has been set
O K
• Response when an ID number has been set
O K
ID number of responding monitor
■ When a command has not been executed correctly*
• Response when no ID number has been set
E R
• Response when an ID number has been set
E R
* This is returned when there is no such command, or when the command cannot be used in the current state of
the monitor.
Example: When "ADJUSTMENT" is used (a command which is effective when the input mode is "ANALOG"),
while video is displayed (the input mode is "VIDEO").
* If communication has not been established for reasons like a bad connection between the PC and the monitor,
nothing is returned, not even ERR.
* If no monitor has been assigned the designated ID number (e.g. if the command IDSL0002
monitor with ID number: 2 is found), no response is returned.
44
E
Return code
(0D , 0A )
H H
Space (20 )
H
SPC 0 0 1
Return code
(0D , 0A )
H H
R
Space (20 )
H
R SPC 0 0 1
ID number
(Continued)
A response is returned when execution of the
pertinent command is finished.
Return code
(0D , 0A )
H H
Return code
(0D , 0A )
H H
is used, but no