Back Panel - Shure UA845 Mode D'emploi

CONTROLS AND CONNECTORS
FRONT PANEL
UA845
UHF ANTENNA DISTRIBUTION SYSTEM

BACK PANEL

1
AC Power INPUT Connector.
1
AC Power OUTPUT Connector. Each UA845 has a Power
2
OUTPUT connector for daisy-chaining up to five (5) Shure
Model UR4 UHF Diversity Single or Dual Receivers to a
single power source.
NOTE: This connector does not work for Shure ULX4 Receivers.
ANTENNA IN Ports, Channel A & B. BNC-type connectors
3
for antennas.
6
2 3 4
FRONT PANEL
FIGURE 1
5 3
BACK PANEL
FIGURE 2
RF CASCADE Connectors (Output connector 5),
4
Channel A & B. BNC-type connectors for adding a fifth
receiver, or additional UA845's, permitting more wireless
receivers to be connected.
RF OUTPUT Connectors, Channel A & B. BNC-type con-
5
nectors for up to four wireless receivers.
12 Vdc OUT Connectors. These power connectors are
6
designed to power up to four (4) Shure ULX Wireless sys-
tems.
9
1
POWER INDICATOR POWER ON/OFF
6
4 5
2
SWITCH
ENGLISH