Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SERVICE AND REPAIRS
•
Only service personnel trained by Hitachi, distributor or em-
•
ployer shall repair the Tool.
Use only Hitachi parts supplied or recommended by Hitachi for
repair.
All quality Tools will eventually require servicing or replacement of
parts because of wear from normal use.
In order to achieve the optimal performance of the NT50AF Pneu‑
matic Flooring Nailer and N5009AF Pneumatic Flooring Stapler
preventative maintenance is recommended.
NOTE:
Specifications are subject to change without any obligation
on the part of HITACHI.
Maintenance Chart
ACTION
Drain air line filter
daily
Keep lubricator filled.
Clean filter element ‑
then blow air through
filter in direction oppo‑
site to normal flow.
Clean magazine and
feeder mechanism.
Keep safety trigger
working properly.
Lubricate the Tool after
use.
Drain air compressor.
WARNING
WHY
Prevent accumulation
Open manual
of moisture and dirt.
petcock.
Keep the Tool lubri‑
Fill with Hitachi pneu‑
cated.
matic tool lubricant.
Prevent clogging of
Follow manufacturer's
filter with dirt.
instructions.
Prevent a jam.
Blow clean daily.
Promote operator
Blow clean daily.
safety and efficient
Tool operation.
Extend the life of the
Supply 5‑10 drops of
Tool.
lubricant into the Tool.
Keep the Tool operat‑
Open petcock on air
ing properly.
compressor tank.
— 29 —
English
HOW
Publicité
Table des Matières
