Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
SERVICE AND REPAIRS
● Only service personnel trained by Hitachi,
distributor or employer shall repair the
Nailer.
● Use only parts supplied or recommended by
Hitachi for repair.
All quality Nailers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE
Specifi cations are subject to change without any
obligation on the part of HITACHI.
Maintenance chart
ACTION
Drain air line fi lter daily.
Keep lubricator fi lled.
Clean fi lter element and blow air
through fi lter in direction opposite to
normal fl ow daily.
Clean magazine and feeder
mechanism.
Keep lock lever working properly.
Lubricate the Nailer after nailing.
Drain air compressor daily.
18
WARNING
Prevent accumulation of moisture
and dirt.
Keep the Nailer lubricated.
Prevent clogging of fi lter with dirt.
Prevent a jam.
Promote operator safety and effi cient
Nailer operation.
Extend the Nailer life.
Keep the Nailer operated properly.
WHY
Open manual petcock.
Fill with Hitachi pneumatic tool
lubricant.
Follow manufacturer's instructions.
Blow clean daily.
Blow clean daily.
Supply 5 – 10 drops of
lubricant into the Nailer.
Open petcock on air compressor
tank.
HOW
Publicité
Table des Matières
