Hitachi NT50AF Mode D'emploi Et Consignes De Sécurité page 8

English
SAFETY
27. DISCONNECT AIR HOSE FROM TOOL WHEN:
1) Doing maintenance and inspection;
2) Loading fasteners;
3) Clearing a jam;
4) It is not in use;
5) Leaving work area;
6) Moving it to another location; and
7) Handing it to another person.
Never attempt to clear a jam or repair the Tool unless you have
disconnected air hose from the Tool and removed all remaining
fasteners from the Tool. The Tool should never be left unattend‑
ed since people who are not familiar with the Tool might handle
it and injure themselves.
28. STAY ALERT.
Watch what you are doing. Use common sense. Do not operate
the Tool when you are tired. The Tool should never be used by
you if you are under the influence of alcohol, drugs or medica‑
tion that makes you drowsy.
29. HANDLE TOOL CORRECTLY.
Operate the Tool according to the Manual. Never allow the
Tool to be operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
30. NEVER USE TOOL FOR APPLICATIONS OTHER THAN THOSE
SPECIFIED IN THIS MANUAL.
31. HANDLE TOOL CAREFULLY.
Because of high air pressure in the Tool, cracks in the surface
are dangerous. To avoid this, do not drop the Tool or strike the
Tool against hard surfaces; and do not scratch or engrave signs
on the Tool. Handle the Tool carefully.
32. MAINTAIN TOOL WITH CARE.
Keep the Tool clean and lubricated for better and safer perfor‑
mance.
33. USE ONLY PARTS, ACCESSORIES OR FASTENERS SUPPLIED
OR RECOMMENDED BY HITACHI.
Unauthorized parts, accessories, or fasteners may void your
warranty and can lead to malfunction and resulting injuries.
Only service personnel trained by Hitachi, distributor or
employer shall repair the Tool.
‑ Continued
WARNING
— 8 —