Service And Repairs - Hitachi NR 90AD Manuel D'instructions Et De Sécurité

English
This Parts List will be helpful if presented
with the tool to the Hitachi Authorized
Service Center when requesting repair or
other maintenance. In the operation and
maintenance of power tools, the safety
regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being
improved and modified to incorporate
the latest technological advancements.
Accordingly, some parts (i.e. code
numbers and/or design) may be
changed without prior notice.
Maintenance chart
ACTION
Drain air line filter daily.
Keep lubricator filled.
Clean filter element — then Prevent clogging of filter
blow air through filter in
direction opposite to
normal flow.
Clean magazine and feeder Prevent a jam.
mechanism.
Keep push lever working
properly.
Lubricate the Nailer after
nailing.
Drain air compressor.
20

SERVICE AND REPAIRS

● Only service personnel trained by
● Use
All quality Nailers will eventually require
servicing or replacement of parts because of
wear from normal use.
NOTE:
Specifications are subject to change
without any obligation on the part of
HITACHI.
WHY
Prevent accumulation of
moisture and dirt.
Keep the Nailer
lubricated.
with dirt.
Promote operator safety and Blow clean daily.
efficient Nailer operation.
Extend the Nailer life.
Keep the Nailer operated
properly.
WARNING
Hitachi, distributor or employer shall
repair the Nailer.
only parts
recommended by Hitachi for repair.
Open manual petcock.
Fill with Hitachi pneumatic
tool lubricant.
Follow manufacturer's
instructions.
Blow clean daily.
Supply 5 – 10 drops of
lubricant into the Nailer.
Open petcock on air
compressor tank.
supplied or
HOW