Troubleshooting; Operating Information - Protecto SST-P 12/20 F30 Instructions De Montage

ENGLISH

8.4. Troubleshooting

Fault
Door does not
close
No extraction
Doors stiff
Please indicate the cabinet type, serial number and model code when reporting any
malfunctions to our customer service technicians.
A detailed description of the malfunction will help us identify what caused it more
easily.

9. Operating information

The owner must compile readily understandable operating information in the
language spoken by the employees, taking account of these operating instructions
and the specific conditions on site.
The operating information must be posted by the owner at a suitable location at the
place of work.
Annual audits of the cabinet, and in particular the heat-triggered release of the
central locking device as well as the sealing strips, should be specified in the
operating information as a minimum requirement.
Protectoplus Lager- und Umwelttechnik GmbH, Tel. +49 4331/4516-0, Fax +49 4331/4516-11
Possible cause
Safety cabinet out of plumb
Fire protection valve closed
because fuse defective
Air exchange rate in cabinet
too high, moving parts
corroded (hinges, etc.)
Internet: www.protecto.de, E-mail:
Possible solution
Position the safety cabinet so
that it is level (by adjusting the
feet)
Have the fuse replaced by a
customer service technician
Reduce the air change rate,
remove rust, oil parts, don't
store aggressive substances in
the hazardous material cabinet,
notify customer service
info@protecto.de
- 43 -