Getting Started; Installation Tips; Installation - Marmitek Connect 620 UHD 2.0 Guide Utilisateur

4

Getting started

4.1

Installation tips

x
Turn off all devices (TV and HDMI sources) before
connecting them to the Connect 620 UHD 2.0™. If a device
cannot be turned off, please remove the plug from the
socket.
x
Only use High Speed HDMI® certified cables for the best
picture and sound quality. Using too much force to connect
or disconnect the HDMI cables may damage them.
x
Please be careful when connecting your HDMI cables. These
damage easily.
4.2

Installation

1. Use an HDMI cable to connect the HDMI sources (such as a
game console, Blu-ray player or digital TV decoder) to the
HDMI ports marked "Input".
2. Use an HDMI cable to connect the TV to the HDMI port
marked "Output".
3. Connect the power adapter to the "DC 5V" and insert the
plug into the socket.
4. Pull the plastic strip from the remote control's battery
compartment to activate the battery and remove the
protective film from the top.
8 © MARMITEK