Package Contents; Getting Started; Installation Tips; Installation - Marmitek Connect 621 UHD 2.0 Guide Utilisateur

3.4 Package contents

A. 1 x HDMI Switcher
B. 1 x Remote Control (battery included)
C. 1 x IR Receiver
D. 1 x HDMI Cable
E. 1 x Toslink mini adapter
F. 1 x Power Adapter
G. 1 x User Manual

4 Getting started

4.1 Installation tips

Turn off all devices (TV and HDMI sources) before connecting them to the

Connect 621 UHD 2.0™. If a device cannot be turned off, please remove the plug
from the socket.
Only use High Speed HDMI® certified cables for the best picture and sound

quality. Using too much force to connect or disconnect the HDMI cables may
damage them.
Please be careful when connecting your HDMI cables. These damage easily.


4.2 Installation

AUTO 1
Output Input 4
1. Use an HDMI cable to connect the HDMI sources (such as game consoles, Blu-
ray players and Digital TV Decoders) to the HDMI ports marked "HDMI input".
2. Use an HDMI cable to connect the TV to the HDMI port marked "HDMI output". To
use the ARC function, your TV should support it. Please refer to your TV's manual
to check which HDMI port supports ARC.
3. Connect the AV receiver to the combined digital/analogue output marked
"Audio out".
Use an optical cable along with the included Toslink adapter for "Digital

Audio". This output supports the audio formats DTS 5.1, Dolby Digital/AC-3
and PCM stereo.
Use a 3.5 mm stereo mini-jack cable for "Analogue audio". This output

supports analogue stereo audio formats.
4. Connect the power adapter to the "DC 5V" and insert the plug into the socket.
5. Pull the plastic strip from the remote control's battery compartment to activate the
battery and remove the protective film from the top.
6
INPUT
2 3 4
INPUT
Input 3
AUDIO
AUTO 2.0 CH 5.1 CH 7.1 CH
Input 2 Input 1
ARC ARC On/Off
AUDIO
Audio out RS232 IR IN
Digital/Analogue
© MARMITEK
DC 5V