Safety Instructions - Marmitek Connect 620 UHD 2.0 Guide Utilisateur

2

Safety instructions

x
Please read these instructions thoroughly before you use the
device and keep them for future reference.
x
Only for indoor use.
x
Do not use the product in a damp environment or near water.
x
Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
x
This product is not a toy. Keep out of reach of children.
x
Do not open the product: the device may contain live parts.
x
Keep batteries out of the reach of children. Dispose of
batteries as chemical waste. Never use old and new
batteries or different types of batteries together. Remove the
batteries when you are not using the system for a longer
period of time. Check the polarity (+/-) of the batteries when
inserting them in the product. Wrong positioning can cause
an explosion.
x
Connect the adapter to the mains only after you have verified
that the line voltage corresponds to the value specified on
the type plates.
x
Never connect a power adapter if it's damaged. In such
cases, please contact your supplier.
x
Repairs or service should only be performed by qualified
personnel.
x
Disconnect the AC/DC power adapter from the mains when
this device is not in use for prolonged time.
x
Improper use, self-installed modifications or repairs will void
any and all warranties.
x
Marmitek does not accept any product responsibility for
incorrect use of the product or use other than for which the
product is intended.
x
Marmitek does not accept liability for any consequential
damage other than the legal product responsibility.
4 © MARMITEK