Safety Warnings - Marmitek Connect 421 UHD Guide Utilisateur

SAFETY WARNINGS

x
To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the
product close to a bath, swimming pool etc.
x
Do not expose the components of your systems to extremely high temperatures or
bright light sources.
x
In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the
case of improper usage of the product or when the product is used for purposes
other than specified. Marmitek does not accept responsibility for additional
damage other than covered by the legal product responsibility.
x
This product is not a toy. Keep out of reach of children.
x
Do not open the product (battery panel excepted): the device may contain live
parts. The product should only be repaired or serviced by a qualified expert.
x
Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
x
Only connect the adapter to the mains after checking whether the mains voltage is
the same as the values on the identification tags. Never connect an adapter or
power cord when it is damaged. In that case, contact your supplier.
1. INTRODUCTION
Congratulations on your purchase of the Marmitek Connect 421 UHD™!
It allows you to use 1 cable to connect 4 HDMI sources to your TV, without any loss of
signal or encryption. It's ideal when your TV doesn't have enough HDMI inputs, or if
you want to connect the devices to your TV using just one cable. Examples of HDMI
sources are game consoles such as a PlayStation or Xbox, Blu-ray players, digital TV
decoders and all other HDMI devices. The Connect 421 UHD™ supports Ultra HD (4k),
Full HD (1080p) and all 3D formats, making it suitable for all your existing and future
equipment. The digital audio output can be used to transmit the sound from all your
connected HDMI devices to your AV amplifier, using a single cable.
Marmitek products are manufactured with great precision and are of high quality.
Please read these instructions carefully and follow the instructions to optimally enjoy
the possibilities of this product.
CONNECT 421 UHD™ 3