Care & Cleaning - Sage the Smart Grill Pro Guide Rapide

CARE & CLEANING
Ensure the grill is turned OFF by turning
the PLATE TEMP dial to the OFF position.
The grill is OFF when the LCD screen displays
OFF. Remove the power plug from the wall
outlet. Allow the grill to cool completely before
disassembling and cleaning.
Always clean the probe, outer body, drip tray
and cooking plates after each use to prevent
a build-up of ingredients.
CLEANING THE PROBE
Wipe the metal probe and cord with a soft,
damp sponge. A non-abrasive liquid cleanser
or mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to the
sponge, not the probe, before cleaning.
CLEANING THE OUTER BODY
Wipe the outer body with a soft, damp sponge.
A non-abrasive liquid cleanser or mild spray
solution may be used to avoid build-up of stains.
Apply the cleanser to the sponge, not the grill
surface, before cleaning. Rinse. Let all surfaces
dry thoroughly prior to inserting the power plug
into a wall outlet.
CLEANING THE DRIP TRAY
After each use, slide out the drip tray and
discard contents. Wash the tray in warm soapy
water with a soft, damp sponge. A non-abrasive
liquid cleanser may be used to avoid build-up
of stains. Apply the cleanser to the sponge,
not the tray, before cleaning. Rinse and dry
thoroughly. Always ensure to re-insert the drip
tray into the grill after cleaning and prior to
inserting the power plug into a wall outlet.
CLEANING THE COOKING PLATES
1.
Wipe the cooking plates with a soft cloth
to remove food residue.
2.
Alternatively, release and remove the
cooking plates:
• Always ensure the grill is completely cool.
• Use the handle to open the top plate
to a 90 degree position.
• Use the PLATE RELEASE on the front, right
side of the top plate to remove the top cooking
plate, and the PLATE RELEASE on the left
side of the control panel to remove the bottom
cooking plate.
• Once released, gently slide the plates off
the grill.
3.
Place the cooking plates in the dishwasher
(top shelf only).
4.
Alternatively, wash the cooking plates
in hot soapy water with a soft, damp sponge.
A non-abrasive liquid cleanser may be used
to avoid build-up of stains. Apply the cleanser
to the sponge, not the plate, before cleaning.
Remove stubborn residue with a non-abrasive
plastic scouring pad or nylon washing brush.
5.
Rinse and dry thoroughly. Always ensure
the cooking plates are correctly re-inserted
and securely locked back into position after
cleaning and prior to inserting the power
plug into a wall outlet.
STORAGE
1.
Ensure the grill is turned OFF by turning
the PLATE TEMP dial to the OFF position.
The grill is OFF when the LCD screen
displays OFF. Remove the power plug
from the wall outlet.
2.
Allow the grill, cooking plates and drip tray
to cool completely.
3.
Ensure the grill, cooking plates and drip tray
are clean and dry.
4.
Ensure the drip tray is correctly re-inserted
into the grill.
5.
Ensure the cooking plates are correctly
re-inserted and securely locked into position.
6.
Ensure the cooking plates are locked together
by sliding the adjustable height control away
from you, into the LOCK position.
7.
Wrap the probe cord around the PROBE
STORAGE on the right side of the grill,
then locate the probe into the recess on
the face of the PROBE STORAGE.
8.
Store on a flat, dry, level surface. Alternatively,
the grill may be stored in an upright position.
EN
9