Care & Cleaning; Cleaning The Drip Tray; Durable Non-Stick Coating - Sage the Adjusta Grill BGR200 Guide Rapide

CARE & CLEANING
Before cleaning, switch the power off at the
power outlet and then remove the power plug.
Allow your grill to cool before cleaning. The grill
is easier to clean when slightly warm.
Always clean your grill after each use to prevent
a build up of baked-on foods.
Wipe cooking plates with a soft cloth to remove
food residue. For baked on food residue
squeeze some warm water mixed with detergent
over the food residue then clean with a non
abrasive plastic scouring pad.

CLEANING THE DRIP TRAY

Remove and empty the drip tray after each use
and wash the tray in warm, soapy water. Avoid
the use of scouring pads or harsh detergents
as they may damage the surface. Rinse and dry
thoroughly with a clean, soft cloth and replace.
Alternatively the drip tray can be cleaned
in the dishwasher.

DURABLE NON-STICK COATING

Cooking on a non-stick surface minimises the
need for oil, food does not stick and cleaning
is easier. When cleaning the non-stick coating,
do not use metal (or other abrasive) scourers.
Wash with warm soapy water. Remove stubborn
residue with a non abrasive plastic scouring pad
or nylon washing brush.
NOTE
Do not use spray-on non-stick coatings
as this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
To store your grill:
1.
Switch off the grill and unplug power cord
from the power outlet.
2.
Allow the grill to fully cool.
3.
Slide the height control clip towards the
front handle to the LOCK position so that
the top and bottom cooking plates are
locked together.
4.
Click the removable drip tray into place.
5.
Wrap the power cord in the cord storage
area below the grill.
6.
Store on a flat, dry level surface.
NOTE
The storage clip should not be used to clamp
down the top plate when food is in the grill.
EN
7