brennenstuhl professionalLINE TL 9-00 Mode D'emploi page 7

OVERVIEW OF THE OPERATING ELEMENTS
1
Lamp head
2
On/Off switch
3
Charger outlet
4
Battery indicator (red/green)
COMMISSIONING
Drain the battery completely and recharge before using the lamp
for the first time.
• On/off switch
if the switch is held down: Boost light for 10 sec
• The flashlight cannot be used while charging
• Status LED
- Low battery status – LED blinks red
- Battery statuses: red while charging, green when the battery
is fully charged.
• If the lamp is not used for an extended period of time,
charge the battery every 3 months.
CHARGING
Unscrew flashlight head
handle.
• With the 230V charger: Connect the 230V power supply unit
the charging port on the battery using the USB cable
The battery pack is fully charged when the LED on the battery pack
turns green.
• With car charger adapter: Connect the car charger
charging port on the battery using the USB cable
• With a laptop: Connect the USB port on the laptop to the charging
port on the battery pack
14715 BA_proLINE LED-Taschenlampe.indd 7
2
switching levels: 100% / 50% / 15%,
4
cannot be seen from outside
1
, remove the Li-Pol battery pack from the
3
using USB cable
www.professionalline.com
5
230V charger
6
Car power adapter with fuse
7
Li-Pol battery
8
USB charger cable
8
8
.
5
to
8
and plug it in.
6
to the
and plug it in.
7
04.07.17 14:25