Preparing & Using The Ninja Hot & Cold Brewed System; Brewing; Custom Brews; Over Ice & Cold Brew - Ninja CP307 Guide D'utilisation

PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™
Fig. 14a
Fig. 14b Fig. 15a

BREWING

NOTE: Some brews have a pre-infusion
cycle with varying times. The brewing
cycle will begin, then there will be
CP307 P4 BACKLIT UI LAYOUT
a pause for a short period before
2017.12.21
resuming. This process is used to evenly
saturate the coffee grounds or tea.

CUSTOM BREWS

CLASSIC BREW & RICH BREW
NOTE: Rich Brew will use slightly less
water and yield slightly less brewed
coffee or tea than Classic Brew.
1 After filling the water reservoir,
place either the COFFEE or TEA
filter holder into the brew basket.
Add the ground coffee, loose leaf
tea, or tea bags to the filter.
2 Close the brew basket, ensuring
it is securely in place. The control
panel will display either COFFEE
(Fig. 14a) or TEA (Fig. 14b) settings
based on the filter holder that has
been inserted.
NOTE: If the brew basket is closed with
no filter holder in place, both COFFEE
and TEA will flash.
14 1-877-646-5288
Fig. 15b
3 Use the Multi-Serve dial to select
the brew size. Place the empty
vessel you would like to brew into
under the brew basket.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: If making a single cup, lower
the Single-Serve Cup Platform and set
your vessel in the center of it. Please
ensure you are using at least a 12 oz.
cup for the Cup size, 14 oz. cup for the
XL Cup size, 16 oz. travel mug for the
Travel Mug size, and 20 oz. travel mug
for the XL Multi-Serve size.
4 Turn the START/SELECT dial to
choose either Classic Brew or Rich
Brew (Fig. 15a, Fig. 15b). If brewing
tea, press the Tea button to toggle
to the tea menu, and use the dial
to choose your tea type. To change
your brew style while in the tea
menu, press the Tea button again.
5 Press the START/SELECT dial to
start the brew. A progress bar on the
control panel will show the status
of the brewing cycle. To cancel the
brew at any time, press the dial again
or press the Power button.
6 The unit will beep and the clock
will display End when the brew
is complete.
PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™
Fig. 16a
OVER ICE BREW & COLD BREW
NOTE: Cold Brew takes about
15 minutes for a Full Carafe.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: Glassware may be used with
the Cold Brew setting, but not the
Over Ice Brew setting.
1 After filling the water reservoir,
insert either the COFFEE or TEA
filter holder into the brew basket.
Add the ground coffee, loose leaf
tea, or tea bags to the filter.
NOTE: For COLD BREW coffee ONLY,
add an additional scoop of coffee
grounds to the brew basket.
2 Close the brew basket, ensuring
it is securely in place. The control
panel will display either COFFEE
(Fig. 14a) or TEA (Fig. 14b)
settings based on the filter holder
that has been inserted.
Fig. 16b
3 Fill your desired vessel to the top with
ice cubes and place the vessel below
the brew basket. Use the Multi-Serve
dial to select the brew size.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: DO NOT add ice to the
water reservoir.
4 Turn the START/SELECT dial to choose
either Over Ice Brew or Cold Brew
(Fig. 16a, Fig. 16b). If brewing tea,
press the Tea button to toggle
to the tea menu, and use the dial to
choose your tea type. To change your
brew style while in the tea menu,
press the Tea button .
5 Press the START/SELECT dial to
start the brew. A progress bar on the
control panel will show the status of
the brewing cycle. To cancel the brew
at any time, press the dial again or
press the Power button.
6 The unit will beep and the clock
will display End when the brew
is complete.
ninjakitchen.com 15