Using The Brew Basket; Using The Drip Stop; Can't Wait For The First Cup; Closing The Drip Stop After A Brew - Ninja CM401 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE BREW BASKET

Open the brew basket by swinging it out
of the coffee maker.
Insert the Filter Holder in the brew basket.
Use the Ninja Smart Scoop™ and follow the
measurements on the scoop to fill the filter.
10 ninjakitchen.com
1
Place the Permanent Filter or a #4 paper
cone filter in the filter holder.
NOTE: If using a paper filter, first ensure
the permanent filter is removed from the
filter holder. Then fold the paper filter
along the seams, open it fully, and firmly
press it into the filter holder, making sure
it is fully seated.
3
Slide the brew basket back into the coffee
maker until it clicks into place.

CAN'T WAIT FOR THE FIRST CUP?

2

CLOSING THE DRIP STOP AFTER A BREW

4

USING THE DRIP STOP

When brewing a carafe, close the Drip Stop
to pause the brew cycle and pour a cup.
Promptly replace the carafe and open the
Drip Stop to complete the brew.
If you forget to open the Drip Stop, the
coffee maker will pause the brew, and after
20 seconds it will give you a friendly audible
reminder. After 6 minutes, the brew will be
canceled.
NOTE: If the Drip Stop is closed before
you begin a brew, the coffee maker
will notify you with 5 beeps and the
Drip Stop indicator will illuminate. Set
the Drip Stop to the open position and
select your brew type.
When the brew cycle is complete, set the
Drip Stop to the closed position to stop
dripping from the brew basket. While the
Drip Stop is closed, the Drip Stop indicator
will illuminate.
NOTE: Remember to open the Drip Stop
when you are ready to brew again. If you
forget, your coffee maker will give you
a friendly audible reminder.
ninjakitchen.com
11

Publicité

Table des Matières
loading

Table des Matières