Scale Removal; Storage - SilverCrest SEAD 1800 A1 Mode D'emploi

4) To clean the pouring tap 0 allow a mild soapy solution to flow through it.
Should there be stubborn soiling on the inside of the pouring tap 0 use a
pipe cleaner or similar to remove it.
5) Afterwards, rinse the pouring tap 0 through with clear water.
6) Screw the tap lever q clockwise back onto the tap 0.

Scale removal

Deposits of scale on the bottom of the appliance lead to increased energy
consumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
1) Use a standard commercial descaling product. Proceed as described in the
instructions for usage of the descaler.
2) After descaling, rinse the appliance with lots of clean and clear water.
NOTICE
► At a low level of calcification (limescale), it is usually sufficient to wipe out
the inside of the appliance with a cloth soaked with vinegar. Afterwards,
rinse out the appliance with clean water and dry it.

Storage

Wind the cable around the cable retainer 8 and insert the plug into the plug
holder in the middle of the appliance base.
Store the preserving boiler at a cool and dry location.
SEAD 1800 A1
GB │ IE │
15 ■