Turning The Power Off; Installing Set-Up Information And The Icc Profile (For Windows) - Sharp LL-T15V1 Mode D'emploi

Connecting the monitor and turning the monitor on and off
Note:
- If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment.
- Depending on the computer or OS, it may be
necessary to use the computer to install monitor
set-up information. If so, follow the steps below to
install the monitor set-up information.

Turning the power off

1. Turn the computer off.
2. Press the monitor's power button.
The Power LED will disappear.
If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.
Turn off device
to which monitor
is connected
OFF
Installing set-up information and the ICC
profile (for Windows)
Depending on the computer or OS, it may be neces-
sary to use the computer to operate the installation
of monitor set-up information etc. If so, follow the
steps below to install the monitor set-up information.
(Depending on the type of computer or OS, com-
mand names and methods may differ. Please follow
the computer's own operation manual while reading
this.)
Press power button
Installing set-up information
For Windows95
Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive
is "A drive".
1. Place the Utility Disk (provided) into the compu-
2. Click on the [Start] button. From [Settings],
3. Double click on [Display].
4. Click on [Settings], [Advanced Properties], and
5. Click on [Have disk], confirm that [Copy manufac-
6. Confirm that the monitor details are selected, and
7. Check that the monitor details are displayed, then
8. Click [OK], and close the window.
9. Remove the Utility Disk from the A drive.
13
About the ICC profile
An ICC (International Color Consortium) profile
is a file that describes the color characteristics of
the LCD monitor. By using an application that
works together with an ICC profile, a high color
resolution can be realized.
- Windows98, WindowsMe and Windows2000
all use the ICC profile.
- When installing Windows98, WindowsMe and
Windows2000 set-up information (described
below), the ICC profile is also installed. If you
would like to install the ICC program only,
please refer to Installing the ICC profile on
page 15.
- When using the ICC profile, please set the
[WHITE BALANCE] to [STD] .
ter's A drive.
choose [Control Panel].
[Monitor], then [Change].
turer's files from:] is [A:] then click [OK].
click [OK].
click [Apply].