Table Des Matières; How Does Marmitek X-10 Work - Marmitek TMD4 Guide Utilisateur

TABLE OF CONTENTS

HOW DOES MARMITEK X-10 WORK?

ADRESSES
SIGNAL RANGE
INSTRUCTIONS FOR USE
INTRODUCTION
APPLICATIONS
PROPERTIES
COLOUR CODE CONNECTING WIRES
MOUNTING INSTRUCTIONS
PROGRAMMING
FREQENTLY ASKED QUESTIONS
TECHNICAL DATA
HOW DOES MARMITEK X-10 WORK?
Marmitek X-10 components use the existing mains wiring to
communicate (using Marmitek X-10 signals). You can build a
complete system using the three different kind of components of
the Marmitek X-10 System:
1. Modules
These components will receive Marmitek X-10 signals and will
switch or dim the attached lamp or appliance.
2. Controllers
These components will transmit Marmitek X-10 signals and thus will
control the Modules.
3. Transmitters
Wireless components like remotes. The signals of these components
will be received by a controller with transceiver functionality (IRRF
7243, TM13 or console of a Marmitek Security System). The
Transceiver will translate the signals into Marmitek X-10 signals on
the power line.
ADRESSES
Up to a maximum of 256 different addresses can be preset. These
are subdivided into a so-called HouseCode (A to P incl.) and a
4
4
4
5
7
7
7
7
8
9
11
13
14
© MARMITEK