Marmitek TMD4 Guide Utilisateur page 10

yellow
orange
red
blue
brown
• Connect the Phase wire and Neutral wire to the connectors of
the MicroModule TMD4.
• Connect the thin wires of the MicroModule to the switch.
yellow
orange
Connect the blue wire to the P terminal of the switch.
• Place the MicroModule to the back of the build-in case behind
the wires.
• The MicroModule can be programmed now (see chapter on
programming).
• After
programming
replace the
switch into the
build-in case.
10
prog.
N
P
P
prog.
N
blue
red
brown
prog.
L
Phase 230V
Neutral
L
prog.
SAIX
© MARMITEK
SAIX