Sigma EF-610 DG Super Mode D'emploi page 23

◆ Ready light lamp will light, and the AF Auxiliary lamp will blink to indicate that the flash is ready for
shooting.
20. Adjust the focus on the subject, and take the picture.
B-2. Ratio-Flash Control (Control Mode
Camera and Controller setting
1. Process the same setting from step 1 to 9 of B-1.
2. Set the ratio-flash control mode display to the [
pressing the
3. The flash mode display will blink when the
pressed.
4. Set the flash mode to TTL by pressing the
5. The ratio-flash display [
6. Set the ratio of the controller by pressing the
7. The ratio-flash display [
8. Set the ratio of Off-Camera Flash 1 by pressing the
9. The ratio-flash display [
10. Set the ratio of Off-Camera Flash 2 by pressing the
11. Press the
Off-Camera Flash Setting
12. Process the same setting of B-1 Off-Camera Flash Setting.
If the off-camera flash unit is plural, allocate the desired off camera flash number to each unit.
◆
It is possible to set the flash ratio for the controller, Off-Camera Flash 1 and Off-Camera Flash 2 as
◆
follows.
(without flash)、1、2、4、8、16
The ratio of flash output amount is setting the value of each unit / total value.
[Example]
Controller
Off-Camera Flash 1
Off-Camera Flash 2
B-3. Ratio-Flash Control (Control Mode
Camera and Controller setting
1. Process the same setting from step 1 to 6 of B-1.
2. Set the control mode to
3. Channel information will blink when the
pressed.
4. Set the channel number (C1 – C4) by pressing
button.
5. Set the ratio-flash control mode display to the [
pressing the
6. The ratio-flash display will blink when the
7. Set the ratio of the controller: Off-Camera Flash by pressing the
or .）
8. Press the
or button.
] of the controller will blink when the
] of Off-Camera Flash 1 will blink when the
] of Off-Camera Flash 2 will blink when the
button, the indicator stops blinking.
by pressing the
or button.
button, the indicator stops blinking.
)
] by
button is
or button.
or button.
or button.
or button.
Setting value
2
1
4
)
or button.
button is
or
] by
button is pressed.
button is pressed.
button is pressed.
button is pressed.
Ratio of flash amount
2/7
1/7
4/7
or button. （ Select the
22