Accessories - Makita BO6040 Manuel D'instruction

Applying wax
1
Use an optional sponge pad. Apply wax to the sponge
pad or work surface. Run the tool to smooth out wax.
NOTE:
• First, wax a non critical portion of the work surface
to make sure that the tool will not scratch the
surface or result in uneven waxing.
Removing wax
1
Use an optional felt pad. Run the tool to remove wax.
Polishing
1
Use an optional wool pad. Run the tool and apply the
wool pad gently to the work surface.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
003340
1. Sponge pad
003342
1. Felt pad
003344
1. Wool pad
ita Authorized or Factory Service Centers, always using
Makita replacement parts.

ACCESSORIES

CAUTION:
• These accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Hook-and-loop type abrasive discs (with pre-
punched holes)
• Sanding cloth 150
• Pad 150 (Super soft, Soft, Hard)
• Hook-and-loop type sponge pad
• Hook-and-loop type wool pad
• Hook-and-loop type felt pad
• Side grip
• Joint
• Hex wrench
MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested
before leaving the factory. It is warranted to be free of
defects from workmanship and materials for the period of
ONE YEAR from the date of original purchase. Should
any trouble develop during this one year period, return
the COMPLETE tool, freight prepaid, to one of Makita's
Factory or Authorized Service Centers. If inspection
shows the trouble is caused by defective workmanship or
material, Makita will repair (or at our option, replace)
without charge.
This Warranty does not apply where:
• repairs have been made or attempted by others:
• repairs are required because of normal wear and
tear:
• the tool has been abused, misused or improperly
maintained:
• alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-
AGES FROM THE SALE OR USE OF THE PRODUCT.
THIS DISCLAIMER APPLIES BOTH DURING AND
AFTER THE TERM OF THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED
WARRANTIES, INCLUDING IMPLIED WARRANTIES
OF "MERCHANTABILITY" AND "FITNESS FOR A SPE-
CIFIC PURPOSE," AFTER THE ONE YEAR TERM OF
THIS WARRANTY.
7
or attachments
Only use accessory
EN0006-1
are
or