Connecting A Tv; Connecting With An Hdmi Tv; About Hdmi - Sherwood R-807 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
6
You can skip the "Crossover" setting.
7
Select "Speaker Distance". The Speaker
Distance menu will appear.
8
Measure the distance from each speaker in your
system to the listener. Set the distances.
9
Use the remote's left and right arrow buttons to
change the distance setting for each speaker
so that it matches the distance you wrote down
in step 8. When you're finished, press the
remote control's RETURN button to return to the
Speaker Setting menu.
10
Select "Channel Level". The Channel Level
menu will appear. Use the remote's left and
right arrow buttons to set Test Tone to "Manual"
and press the remote's ENTER button. After the
on-screen countdown you will hear test noise
through the front left speaker.
11
Sit in the main listening position and adjust the
main unit's volume control so the test sound
is moderately loud. Note the volume of the
test sound through the first speaker. Press the
remote's down arrow button to advance the
test noise to each of your system's speakers
and note the volume level of the noise in each
speaker.
12
As you advance the test sound through the
speakers, use the remote's left and right arrow
buttons to adjust the volumes of the channels
until all of them play at the same volume.
When you're finished, press the remote's SETUP
button to turn off the on-screen menus.

Connecting a TV

Connecting with an HDmI TV

With HDMI, you can easily enjoy high quality sounds
and images. The main unit plays audio from HDMI
compatible products while also passing on the video
signal to a HDMI-connected TV.
Rear Panel

About HDmI

HDMI (High Definition Multimedia Interface) supports
both audio and video on a single digital connection
for use with DVD players, DTV, set-top boxes, and
other AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect
the digital content transmitted and received by
DVI-compliant displays.
making Connections
15

Publicité

Table des Matières
loading

Table des Matières