ZANKER EHE60000X Notice D'utilisation page 15

• Serial number ....................
Built-in appliances
• Only use the built-in appliances after you assemble
the appliance into correct built-in units and work sur-
faces that align to the standards.
To attach the seal.
• Clean the worktop in the area of the cut-out section.
Assembly
min.
500mm
• Apply the supplied seal strip to the top of the worktop
along the edge of the cut-out. Do not stretch it. Attach
the seal strip carefully in order to align the ends in the
middle of one side of the cut-out. When you cut it to
the correct length (add some extra length), put the
two ends together.
min.
50mm
Ø 10
4x
R 5
A
+1
490
A
560
+1
min.
25 mm
15