Cleaning And Maintenance - HQ Power HQSM10003 Mode D'emploi

6. Installation
•
Only install and use the device on a flat and stable surface. The device may not be tilted.
•
Install the device in a location where you can easily access the power cord.
•
Install the device in a well-ventilated area.
•
The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.
•
Never stand directly below the device when it is being mounted, removed or serviced. Have a
qualified technician check the device once a year and once before you bring it into service.
•
Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
•
Make sure there is no flammable material within a 0.5 m radius of the device.
7. Operation
1. Make sure to fill the tank with smoke liquid.
2. Switch on the device and wait for the machine to warm up.
3. Press the button on the remote control to trigger the fog output. The device will continue to output
fog as long as the button is pressed.
4. Switch off the device after use.
8. Troubleshooting
There is no power.
Check the mains power supply.
Check the fuse.
There is no fog output.
Check the fluid level.
Check the remote control.
The remote control does not work.
Make sure the remote control is well connected.
The fluid tank is filled but the sensor indicates it is not.
Try resetting the smoke machine by switching it off and on again.
Contact your dealer if the problem persists.
The smoke machine is not heating up.
Contact your dealer.
9.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning
•
Make sure to empty the tank before cleaning.
•
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
•
Clean the external optics with glass cleaner and a soft cloth every 20 days.
•
Always be sure to dry all parts completely before plugging the unit back in.
•
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).
•
Do not immerse the device in any liquid.
V. 02 – 15/06/2020
HQSM10003/HQSM10004
Never operate the device without smoke liquid at any time.
5 ©Velleman nv