Sportplus SP-WB-003-B Mode D'emploi page 18

30
16
20 x1 32 x2 30 x1
STEP 7:
• Attach the leg curler (13) to the front foot (12). Secure with 1 screw M10 x 85 (20), 2
washers M10 (32) and 1 nut M10 (30).
• Attach the lifting rods (17) to the leg curler (13). Secure with 1 locking knob (35).
Then slide the padding (16) onto the lifting rods (17).
• Attach the locking device (38) to the leg curler (13). The locking device (38) is
required in order to secure the leg curler to the front foot (12).
SP-WB-003-B-IM-DE+GB+FR-02.indb 34-35
20
32 17
32
12
13
17
35 x2 38 x1
34
16
38
35
28 x2
STEP 8:
• Install the insertion pipe (18) to the front foot (12). Secure with the locking knob (39).
• Attach the biceps padding (19) to the insertion pipe (18). Secure with 2 sets of
screws M6 x 16 (28) and washers M6 (34).
34
28
12
39
34 x2 39 x1
35
19
18
10/6/2016 5:03 PM