Basics
Making calls
VOL
switch
(CHANNEL)
(REDIAL/PAUSE)
(*TONE)
Additional tasks
To
Improve reception
Adjust the handset volume
Switch to tone dialing temporarily
Notes
• If the handset beeps every second during conversation and "OUT OF
RANGE" appears on the display, move closer to the base unit; otherwise, the
call will be disconnected after 15 seconds. Note that, however, you may not
hear beeps if it's noisy on the handset.
• Do not press (CHANNEL) when you're far from the base unit. The call may
be disconnected.
EN
12
Basics
1
Pick up the handset from the
base unit.
2
Press (TALK) and wait until
"TALK" appears on the display.
You then hear a dial tone. If you
hear five short error beeps and
"OUT OF RANGE" appears on
the display, move closer to the
base unit.
3
Dial the phone number.
4
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
Do this
Press (CHANNEL).
Slide VOL.
Press (*TONE) after you're connected.
The line will remain in tone dialing until
disconnected.