dirna Bergstrom bycool green line DINAMIC 1.2 Instructions De Montage page 20

DINAMIC 1.2
EN ES
3 CABIN EXTERIOR:
Introduce the template level using the exterior,
taking as reference the Ø4 bore made, mark and
make the remaining bores.
4
Introduce M6 studs in the interior with a nut and
washer as indicated.
5
Secure the exterior with a rubber washer, a flat
washer and a self-locking nut, securing at the
bottom with a socket wrench of 10.
6 Position bushing and nut covers.
7
Pass the waste water pipe through the bore of
Ø19, through the bushing, towards the inside of
the cabin.
4
7
5
20
Air conditioning for vehicles
6
6