SOMFY Ixengo L 24V Manuel D'installation page 6

EN
CONTENTS
1. Safety instructions
1.1. Caution - Important safety instructions
1.2. Introduction
1.3. Preliminary checks
1.4. Risk prevention
1.5. Electrical installation
1.6. Clothing precautions
1.7. Safety instructions relating to installation
1.8. Regulations
1.9. Assistance
2. Product description
2.1. Composition of the standard pack - Fig. 1
2.2. Dimensions - Fig. 2
2.3. Field of application - Fig. 3
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
1. SAFETY INSTRUCTIONS
DANGER
The motorisation must be installed and adjusted by a
professional motorisation and home automation install-
er, in compliance with the regulations of the country in
which it is to be used.
Failure to follow these instructions may result in serious
injury, e.g. due to crushing by the door.
1.1. Caution - Important safety instructions
WARNING
For reasons of personal safety, it is important to follow
all the instructions, as incorrect installation can lead to
serious injury. Retain these instructions.
The installer must train all users to ensure that the mo-
torisation is used safely in accordance with the user
manual.
The user and installation manuals must be given to the
end user. The installer must explain clearly to the user
that installation, adjustment and maintenance of the mo-
torisation must be performed by a professional motori-
sation and home automation installer.
2
TRANSLATED VERSION OF THE MANUAL
2
2
2
3
3
3
3
3
4
4
4
4
4
4
3. Installation
3.1. Defining the dimensions for inward opening - Fig. 4
3.2. Defining the dimensions for outward opening - Fig. 5
3.3. Installing the pillar mounting bracket
3.4. Installing the gate leaf mounting bracket - Fig. 7
4. Motor electrical connection - Fig. 8
5. Locking/unlocking the motors
6. Setting the end limits - Fig. 11
7. Technical data
1.2. Introduction
1.2.1. Important information
This product is a motor for hinged gates, for residential use.
To ensure compliance with the standard EN 60335-2-103, this
product must be installed with a Somfy control box. The as-
sembly is together designated as a "motorisation". The main
purpose of these instructions is to satisfy the requirements
of the aforementioned standard and to ensure the safety of
equipment and persons.
WARNING
Any use of this product outside the field of application
described in these instructions is prohibited (see "Field of
application" paragraph in the installation manual).
The use of any accessories or components not recom-
mended by Somfy is prohibited, as personal safety can-
not be guaranteed.
Any failure to comply with the instructions given in this guide
shall exclude Somfy from all liability and invalidate the Somfy
warranty.
In case of any doubts when installing the motorisation, or to
obtain additional information, consult the website www.som-
fy.com.
The instructions may be modified if and when there is a change
to the standards or to the motorisation.
©
Copyright 2017 SOMFY ACTIVITES SA. All rights reserved.
IXENGO L 24V
4
4
5
5
5
5
5
5
5