Cleaning And Disinfecting; Product Symbols - DEXIS DEXcam 3 Manuel De L'utilisateur

Cleaning and Disinfecting

Important:
Before applying cleaning or disinfecting solution:
•
disconnect the camera from power, and
•
disconnect the USB cable from the USB port.
Do not soak the camera.
Always dry completely after cleaning or disinfecting.
To clean: Use a lint-free cloth to apply a solution of mild soap and
water.
To disinfect: Use a lint-free cloth to apply isopropyl alcohol (70%).

Product Symbols

Indicates the product should be used only once. The symbol is
found on the packaging for the sheaths.
This symbol on the product and/or accompanying documents
means that used electrical and electronic products should not be
mixed with general household waste.
Please refer to the written instructions of this manual.
Direct Current (DC)
The ETL listed mark indicates that Intertek has certified the product
described herein under control number 4005847 to be in
compliance with the applicable regulations. Intertek is:
• a Nationally Recognized Testing Laboratory by the Occupational
Safety and Health Administration (OSHA) in the United States.
• a Certifying Body in Canada by the Standards Council of Canada.
The CE represents that the product herein specified meets the
provisions of European Council Directive 93/42 EEC concerning
medical devices and Directive 2011/65/EU of the European
Parliament and of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
(RoHS).
Date of Manufacture
Manufactured for
Authorized Representative in Europe
9