DEXIS DEXcam 3 Manuel De L'utilisateur page 11

DEXcam
To use the camera, remove it from the holster and it will automatically
turn on. The camera will begin to send video images.
NOTE:
By default the image is displayed as a mirrored image. To flip
the display, refer to the procedure, "Set DEXimage Mirror
Preference."
Position the camera then press and release the Capture button to freeze
the image on your viewing screen. If you want to save this image, press
and hold the Capture button for at least two seconds. This will send the
image to the imaging software on the computer.
If you have purchased the optional Foot Switch, you may use it in place
of the Capture button on the camera. When the Foot Switch is plugged
in and one of the two foot pedals is pressed, the Capture button on the
camera will be disabled until the Foot Switch is removed and is no lon-
ger detected. The blue C pedal is used exactly like the Capture button
on the camera. The red M pedal toggles between live video and previ-
ously stored images.
CAUTION
Ensure that the camera is properly placed into the
holster with the cord end facing down. The camera
will fail to turn OFF if placed in the holster with the
cord end facing up.
Place the camera in the camera holster to turn the camera off.
Set DEXimage Mirror Preference
Click on the DEXIS icon to open the DEXIS application. The DEXIS
Administration screen displays.
Click on the Wrench icon to open Tools and Preferences.
Click on the DEXimage tab. Select Extraoral from the set of
preferences for Mirror.
Handling
CAUTION
Failure to follow instructions may result in light
bodily injury or damage to the product.
™ 3 Operation
7